DIY: Family Birthdays Sign (Part 1)

After a terrific week with my family, I realized that I really wanted to have a part of my family with me in my home. Before Camp Tucker, I found this adorable DIY Family Birthdays plaque on Pinterest by Christiney’s Crafts. I even got the materials before we left: 1 pine signboard (6″x23″) and 2 packages of 1.5″ circles (44 total). I know I will need to go get some more of these circles before the project is over.

To start, I needed to decide what font I should use. Since this will be displayed in our home, I wanted Tim’s opinion. When asked if it should be formal or cutesy, his instructions to me were to “go cutesy” and make it bright and colorful.

Yet, when I showed him the font options, he liked the simplest of the fonts (the second from the top). I decided to go right in the middle. Our font for this project will be “Janda Curlygirl Chunky.” In the picture above, it is #3. You can download the font for free from Dafont.com. Now, I will stop here and say that never should the words “girl” and “chunky” be in the same phrase. Whoever named this font must not be a girl.

The next step was to figure out the sizing that I wanted to use. For this, I opened up a Pages document (the Mac version of Word… which I prefer over MS Word), and I typed out the word “Birthdays” (I will be using this phrase over “Family Birthdays”). I made it a very large size, checking the height of it to be sure that it would not be too high for my sign backing. I was unsure if I wanted to go with size 200 or 220, so I made versions of both of them (it would go onto 2 different pieces of paper, which is ok), and I printed them out.

I also wanted to have a template for the months. I don’t like to freehand paint letters. They never work out well. So to make sure they would fit on my little wooden circles, I made a table that had each cell at 1.5″x1.5″. I then typed the month abbreviations in each cell, centering the text horizontally and vertically. I tried a few different sizes for this as well (30, 34, and 36). I printed these out.

By the way, if you don’t have any plain copy paper, and you don’t feel like running to the store, you can always print on notebook paper. Hey, it works!

I then tried these printed items out, and I decided to go with “Birthdays” in size 220, and the birthday months in size 34.

Next, comes the painting of the sign. For this, I propped the sign onto two mason jars (with some grocery bags underneath to catch the extra paint). I have had too many painting projects where the wood sticks to my paper lining because of extra paint. This is a perfect idea so that I can paint just underneath the plaque without it sticking. Thanks, Pinterest!

I decided to go with an off-white color (#450 Parchment) for the base of the sign. I’m thinking cottage-y, and it will match whichever room we stick it in. I love FolkArt Acrylic Paint!

One lazy-painter technique that I use when I have to coat a large surface are to just squeeze the paint onto the surface and then spread it out. You just have to be fast enough so that there isn’t a layer of film that starts to dry before you get to all of the paint.

Another trick is to just put the paint right on your paintbrush. The paintbrush trick is helpful because you can easily get into all of the nooks and crannies. The best part about these techniques is that you don’t have to wash a plate or palate. Just wash the brush when you are done!

At this point, I stopped to have lunch. Mmmm, pasta!

While pausing, I must say that neither Toby nor Lucy found this project to be very enjoyable. Lucy showed her feelings by performing her favorite napping technique.

Toby was very unhappy when I moved him out of his favorite napping place: my crafting chair. Please excuse the towel, as this is the only way to prevent a blanket of cat hair on my chair.

———————————————————————————————————————————————————————-

This next part is the best and easiest ways to paint lettering. Once you learn this trick, you will never go back!

First, take any pencil and color the back of your printed paper. You will want to color wherever there is some font.

Next, position your paper on top of the item to be painted. At this point, I tape the paper down so that it doesn’t move or shift. Outline each letter (it’s okay to press hard).

Look what you did! Now you can see the outline of your letter!

At this point, pick your paint color. I use FolkArt’s Licorice. This is a great basic black color. Another lazy painter tip: shake well and use the cap to hold your paint. No washing cups afterwards or wasting paint.

The next step is to paint, using those outlines. I always do just a letter at a time, and then I cut that letter off once it isn’t needed anymore.

After that, you are done!

Next up: adding the months and the names/birthday to the sign.

About these ads
This entry was posted in Do-It-Yourself, Family, Home and tagged , , , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s